Description
The structure to get the most out of the harness tensioner. The harness tensioner allows you to feel the forces of acceleration and braking. If the harness rubs against the harness channel and descends vertically, this cancels out part of the effect. It is therefore necessary to use bearings to allow the harness to slide without friction. This is the purpose of this structure.
The P1 harness tensioner can be attached to the central reinforcement on either side. The 4040 profiles supplied can be raised or lowered by means of tee-nuts, enabling other accessories such as helmet mounts or speakers to be fitted.
Assembly
The two brackets attach to the two 4040 profiles on which the seat rails are mounted. Example of compatible chassis: Trak Racer TR160, TR80, TR40, Simlab P1X, GT1, LPSIMU 1, LPSIMU 2, LPSIMU 3, LPSIMU 4.
Other chassis such as the Rseat A1 120 and A1 PRO can be adapted by adding a 4040 profile under each slide.
Maximum distance: 466mm
Minimum distance: 190mm
Three possible bucket angles: 105°, 122°, 135°.
Made in France
The brackets and reinforcement are made to measure in the Oise region of France. Profiles are of EU origin.
Package contents
- 2 x profile 4040 1m
- 2 x steel square
- 1 x central reinforcement
- 2 x bearings kp001
- 1 x rod 12mm x 40cm
- screws and tee nuts
Opinions
There are currently no product reviews.